Apollo Products

Home
: Products
: UL
: XP95A

XP95A

The XP95A range of analoge addressable fire detectors is advanced in design and performance and offers unique features that benefit both the installer and the end user.

The range is based on Apollo’s XP95 range. XP95A has a ‘central intelligence’ system where all the decisions are madeby the control panel.

Each detector is addressed using Apollo’s patented XPERT card, supplied with the mounting bases.

Key features of XP95A include:

• XPERT card addressing
• Analoge value report
• Address confirmation
• Alarm flag
• Unobtrusive design
• Error check

XP95A Ionization Smoke Detector

The XP95A Ionization Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers and causing a current flow. If smoke enters the chamber, the currentflow is reduced leading to an alarm.

More information ...

XP95A Photo-Electric Smoke Detector

The XP95A Photo-Electric Smoke Detector works on the light-scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.
More information ...

XP95A Heat Detector

The XP95A Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. It is classified as an Ordinary detector by UL
More information ...

XP95A Multisensor

The XP95A Multisensor contains a photo-electric smoke sensor and a thermistor (temperature sensor) whose outputs are combined to give the final analoge value.
More information ...

XP95A Loop Powered Beam Detector

The XP95A Beam Detector is made up of three main parts: the transmitter, which projects a beam of infra-red light, the receiver, which registers the light and produces an electric signal, and the interface, which processes the signal and generates alarm or fault signals.
More information ...

XP95A Mounting Base

All detectors in the XP95A range fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detectorterminals. XPERT cards are supplied with all bases.
More information ...

E-Z Fit Base

The E-Z fit base is a low profile 6” mounting base for XP95A detectors.
More information ...

XP95A Isolating Base

The XP95A Isolating Base senses and detects short circuit faults on XP95A loops and spurs.
More information ...

XP95A Isolator

The XP95A Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.
More information ...

XP95A Isolator Base

The XP95A Isolator Base is unique and designed to only accept the XP95A Isolator.
More information ...

XP95A Low Power Relay Base

The XP95A Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closers.
More information ...

XP95A Mini Priority Switch Monitor Module

The XP95A Mini Priority Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analoge control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.
More information ...

XP95A Mini Switch Monitor Module

The XP95A Mini Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analoge control equipment.
More information ...

NEW! Mini Switch Monitor Module

The New Mini Monitor Module is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-rail(using a twist-click motion) or mounted within an enclosure, for example a manual call point.
More information ...

XP95A Switch Monitor Module

The XP95A Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts connected and to report the status to Apollo compatible analog control equipment.
More information ...

XP95A Priority Switch Monitor Module

The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated.
More information ...

XP95A Dual Priority Switch Monitor Module

The XP95A Dual Priority Switch Monitor Module contains two priority switch monitor modules (55000-806) on a single plate.
More information ...

XP95A Switch Monitor Input/Output Module

The XP95A Switch Monitor Input/Output Module provides a voltage free, single pole, change-over relay output, a single, monitored switch input and unmonitored, non-polarized opto-coupled input.
More information ...

XP95A Sounder Control Module

The XP95A Sounder Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel.
More information ...

XP95A Relay Output Module

The XP95A Relay Output Module provides a single 2-pole changeover relay.
More information ...

Find Out More

	apollo Advanced search Apollo Diary Training Schedule Management Departments Distributors History Vacancies The Monitor Apollo in the Community Video Library Apollo News Products New products Intelligent Conventional Interfaces Audio Visual Signalling Specialist Detectors Manual Call Points Bases Mounting Accessories Intrinsically Safe Marine UL Loop Calculator Test Equipment and Maintenance Control Panels Support Apollo Tone Table CPD Seminars Training Service Department Warranty Choosing Devices Glossary FAQs Case Studies External Links Loop Calculator Literature Full Product Catalogue Sales Technical Installation The Monitor PIN Sheets All literature Application Guides Certification Third party approvals Certificates of conformity Declarations of conformity Directives & Policies General Conditions of Sale WEEE Directive Quality Policy Environmental Policy Contact Contact Us Map Ordering Apollo Products Apollo America Apollo Apollo Deutschland Apollo Ireland Apollo España Home : Products : UL : XP95A XP95A The XP95A range of analoge addressable fire detectors is advanced in design and performance and offers unique features that benefit both the installer and the end user. The range is based on Apollo’s XP95 range. XP95A has a ‘central intelligence’ system where all the decisions are madeby the control panel. Each detector is addressed using Apollo’s patented XPERT card, supplied with the mounting bases. Key features of XP95A include: • XPERT card addressing • Analoge value report • Address confirmation • Alarm flag • Unobtrusive design • Error check XP95A Ionization Smoke Detector The XP95A Ionization Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers and causing a current flow. If smoke enters the chamber, the currentflow is reduced leading to an alarm. More information ... XP95A Photo-Electric Smoke Detector The XP95A Photo-Electric Smoke Detector works on the light-scatter principle and is ideal for applications where slow-burning or smouldering fires are likely. More information ... XP95A Heat Detector The XP95A Heat Detector monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature. It is classified as an Ordinary detector by UL More information ... XP95A Multisensor The XP95A Multisensor contains a photo-electric smoke sensor and a thermistor (temperature sensor) whose outputs are combined to give the final analoge value. More information ... XP95A Loop Powered Beam Detector The XP95A Beam Detector is made up of three main parts: the transmitter, which projects a beam of infra-red light, the receiver, which registers the light and produces an electric signal, and the interface, which processes the signal and generates alarm or fault signals. More information ... XP95A Mounting Base All detectors in the XP95A range fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detectorterminals. XPERT cards are supplied with all bases. More information ... E-Z Fit Base The E-Z fit base is a low profile 6” mounting base for XP95A detectors. More information ... XP95A Isolating Base The XP95A Isolating Base senses and detects short circuit faults on XP95A loops and spurs. More information ... XP95A Isolator The XP95A Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section. More information ... XP95A Isolator Base The XP95A Isolator Base is unique and designed to only accept the XP95A Isolator. More information ... XP95A Low Power Relay Base The XP95A Low Power Relay Base incorporates a low power relay to control field equipment such as automatic door closers. More information ... XP95A Mini Priority Switch Monitor Module The XP95A Mini Priority Switch Monitor is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analoge control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated. More information ... XP95A Mini Switch Monitor Module The XP95A Mini Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analoge control equipment. More information ... NEW! Mini Switch Monitor Module The New Mini Monitor Module is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-rail(using a twist-click motion) or mounted within an enclosure, for example a manual call point. More information ... XP95A Switch Monitor Module The XP95A Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts connected and to report the status to Apollo compatible analog control equipment. More information ... XP95A Priority Switch Monitor Module The XP95A Priority Switch Monitor Module is designed to monitor the state of one or more single pole, volt free contacts and to report the status to Apollo compatible analog control equipment. It can also place a signal on the loop to provide early warning if a device such as a pull station is operated. More information ... XP95A Dual Priority Switch Monitor Module The XP95A Dual Priority Switch Monitor Module contains two priority switch monitor modules (55000-806) on a single plate. More information ... XP95A Switch Monitor Input/Output Module The XP95A Switch Monitor Input/Output Module provides a voltage free, single pole, change-over relay output, a single, monitored switch input and unmonitored, non-polarized opto-coupled input. More information ... XP95A Sounder Control Module The XP95A Sounder Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel. More information ... XP95A Relay Output Module The XP95A Relay Output Module provides a single 2-pole changeover relay. More information ... Find Out More UL Discovery UL XP95A Series 65A Telephone: +44 (0)23 9249 2412 Site Map Disclaimer Apollo Fire Detectors Limited is a Halma Company © 1999 - 2010 To report an error on this page, please email us with the details.