New Relay Base From Apollo Aimed At Security Applications
A new low-profile 12 volt relay base for Apollo's Series 65
conventional smoke and heat detectors can be used in security
applications as well as in fire systems, depending on whether
non-latching or latching mode is selected.
The new base incorporates a single-pole, voltage-free changeover
contact for switching ancillary equipment. When the detector
changes to the alarm state, the relay is energised, causing the
contact to change state. In the latching mode the contact will
remain in this condition until the detector is manually reset, but
in the non-latching mode the contact automatically re-sets both
itself and the detector.
Designed to operate over a voltage range of 10 volts to 15
volts, the relay base is operated by the detector and must
therefore be fitted with a Series 65 smoke or heat detector to
function.
In common with all other Series 65 bases, the relay base allows
detectors to be easily fitted without using force. By using a 'one
way only' fit, it also eliminates the possibility of fitting a
detector incorrectly.
Apollo's Series 65 conventional detector range includes
ionisation and integrating ionisation smoke detectors, optical
smoke detectors and heat detectors. A selection of bases and relay
bases, in addition to the new 12 volt relay base, is also
available.
Related Products