Back

Discovery Marine Mounting Base

Product code: 45681-210MAR

45681-210MAR - Discovery Marine Mounting Base
All detectors in the Discovery Marine range are for use with the Marine Mounting Base. The mounting base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT 7 Cards are supplied with all Discovery bases.
Full details
Operating Principles

An earth connection is not required for either safety or correct operation of detectors. The ground (earth) terminal is isolated and is provided for tidy termination of grounded conductors or cable screens and to maintain earth continuity where necessary. All terminals are marked according to their function. Bases have a wide interior diameter for ease of access to cables and terminals and there are two slots for fixing screws. The slots enable two fixing screws to be located at a spacing of 51 to 69mm. Detectors fit into bases one way only, without snagging, and require clockwise rotation without push force to be plugged in. Universal address cards, known as XPERT cards, are supplied with all bases. Consult the coding guide in the installation instructions to determine which pips are to be removed from the card to give the correct address. Lay the card on a flat surface, pips down, insert a screwdriver into the slot on the reverse of the pip to be removed and give a firm twist. When the card is coded insert it into the slot in the side of the appropriate base, making sure that the card locks itself into place. As a detector is inserted into the base, the remaining pips operate the address buttons on the detector and the detector electronics reads the address.

Device Addressing

For details refer to datasheet PP2479.

Communication

Discovery

Maintenance & Service

Detectors should be maintained according to BS 5839-1 or other locally applicable code. Test equipment can be ordered from Apollo for testing smoke and heat detectors. Detectors should not be cleaned in the field except for careful removal of exterior dirt with a damp cloth. For cleaning and recalibration detectors should be returned to Apollo Fire Detectors or to the local distributor.

EMC Directive 2004/108/EC

The detector complies with the essential requirements of the EMC Directive 2004/108/EC, provided that it is used as described in this datasheet.

Construction products regulation 305/2011

The detector complies with the essential requirements of the Construction Products Regulation 305/2011.

Product Information

All detectors in the Discovery Marine range are for use with the Marine Mounting Base. The mounting base is a low insertion force base with stainless steel contacts for the detector terminals. XPERT 7 Cards are supplied with all Discovery bases.

Key Features

XPERT 7 Card addressing One-way fit Locking feature to prevent unauthorised removal

Search engine tags

45681210MAR, 45681210, 45681-210, 45681 210

General
Warranty10 year
Electrical
Terminal functions L2+L2 Loop in & out positive, double terminal
Terminal functions L1 in-L1 in Loop in & out, double terminal
Conformance
Approvals
  • VNIIPO
  • MED
  • KRS
  • Kazak
  • CCS
  • ABS
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.