Back

Conventional I.S. Manual Call Point (Red)

Product code: 55100-031APO

55100-031APO - Conventional I.S. Manual Call Point (Red)
The Conventional IS Manual Call Point has been designed to operate on conventional intrinsically safe fire detection systems. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed. Full information on this to be found in PP1095. The Manual Call Point is available in two versions, indoor and outdoor in either red or yellow.
Full Details
Brand Features

'Plug and Play' terminal connections for fast wiring Resettable element

Operation

The Manual Call Point consists of a 470 resistor in series with a normally open switch contact. The Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which connects neatly to the call point. Once activated, the manual call point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home.

Mechanical Construction

The component parts of the call point are moulded in polycarbonate or ABS, depending on their function.

Product Information

The Conventional IS Manual Call Point has been designed to operate on conventional intrinsically safe fire detection systems. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed. Full information on this to be found in PP1095. The Manual Call Point is available in two versions, indoor and outdoor in either red or yellow.

General
Warranty10 year
Environmental
Humidity (min)0% RH
Humidity (max)93% RH
Humidity Noteno condensation or icing
Humidity0% to 93% (no condensation or icing)
Operating temperature (min)-10°C
Operating temperature (max)55°C
Operating temperature-10 to 55°C
IP rating Value IP24D
Conformance
StandardsEN 54-11
ApprovalsCCS
Mechanical
Weight180g
ColourRed
Product length89mm
Product width59.2mm
Product depth93mm
Key typeKAC Manal Call Point test & reset key
Certification Documents
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.