Electrical Description
The Intelligent Manual Call Point is loop powered and operates at 17-35V dc.
Operation
The address of each call point is set at the commissioning stage by means of a DIL switch.
A solid red alarm LED is provided on the manual call point. This LED is controlled independently of the call point, by the control panel. The LED will flash yellow if there is a fault and flash green when the device is polled. Discovery and CoreProtocol configurable.
Once activated, the Intelligent Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs.
The Intelligent Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Isolator operation is indicated by a solid yellow LED. For further details of the isolator refer to data sheet PP2090, available on request.
This manual call point helps reduce installation time as all the initial installation cabling is wired to a removable terminal block which fits neatly in the back of the manual call point.
Mechanical Construction
The component parts of the call point are moulded in a robust fire retardant polycarbonate.
Communication
XP95, Discovery and CoreProtocol compatible
Backward Compatibility
The Intelligent Manual Call Point will operate with compatible Apollo control equipment using the digital XP95, Discovery and CoreProtocols.
EMC Directive 2014/30/EU
The Intelligent Manual Call Point complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described.
A copy of the Declaration of Conformity is available from Apollo on request.
Conformity of the Intelligent Manual Call Point with the EMC Directive does not confer compliance with the directive on any apparatus or systems connected to it.
Construction products regulation 305/2011
The Intelligent Manual Call Point complies with the essential requirements of the Construction Products Regulation 305/2011.
A copy of the Declaration of Performance is available from Apollo on request.
Product Information
The Intelligent Manual Call Point has been designed for indoor applications and are available in a variety of colours for different applications such as initiating a hazard rather than a fire alarm. The Intelligent Manual Call Point can be used on XP95, Discovery and CoreProtocol systems.
Key Features
Resettable operating element
Easy access, front reset mechanism
E-Z fit connector system for installation
Ergonomic reset key
170° viewable LED
Continuity link for cable insulation testing
Suitable for semi flush or surface mounting
How to Order
Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.
Full details of our service standards can be downloaded here.
Existing customers
Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.
New customers
Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.
Oops…
Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.
Please note…
Remember to quote your account number and purchase order number on any order correspondence.
All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.