Back

Mini Switch Monitor

Product code: 55000-760RUS

55000-760RUS - Mini Switch Monitor
The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, for example a manual call point. It is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue addressable control equipment.
Full Details
Electrical Description

The Mini Switch Monitor is loop powered and operates at 17–28V DC with protocol pulses of 5–9V.

Operation

The Mini Switch Monitor is a miniature interface. The monitor is designed to fit into equipment with limited space or to be mounted within an enclosure such as a manual call point. The monitor can also be fitted onto a standard 35mm DIN-rail using a twist-click motion. The Mini Switch Monitor is designed to monitor the state of one or more single-pole, volt-free contacts. It also reports the contact status to Apollo compatible fire control panels. The Mini Switch Monitor features a 20I short–circuit isolator as standard and can be used as an interrupt or non-interrupt device. The interrupt feature (selected via the DIL Switch) means the monitor can be used where a priority response is required, in particular for monitoring an individual or a zone of conventional manual call points. Note: When the eighth section of the DIL switch is changed, the Mini Switch Monitor will change the type code it sends to the panel. The panel will have to be programmed to accept this change. The unit provides “normal”, “fault”, “pre-alarm” and “alarm” states to the control equipment. For the states are derived from the switched resistive values refer to the Datasheet (PP2282). The device accepts a maximum line resistance of 50Ω and requires a 20kΩ End-of-Line resistor.

Mechanical Construction

The Mini Switch Monitor is moulded from the same white self-extinguishing polycarbonate as Apollo detectors. The unit has three status LEDs, one red, one green and one yellow. The red LED is switched by the control panel and illuminates in the event of an alarm condition being detected. The green LED means that the device is polled. The yellow LED can either mean a short-circuit on loop-wiring (constant) or a fault on the monitored circuit (pulsing). The unit has provision for a remote LED which is switched by the control panel. The length of cable used for the remote LED must not exceed 3m.

Backward Compatibility

XP95, Discovery and CoreProtocol compatible

Product Information

The Mini Switch Monitor is an interface within an entirely new housing. This allows the unit to be fitted onto a standard 35mm DIN-Rail (using a twist-click motion) or mounted within an enclosure, for example a manual call point. It is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue addressable control equipment.

General
Warranty10 year
Electrical
Protocol voltage (min)5V
Protocol voltage (max)9V
Protocol voltage5 to 9V peak to peak
Power-up surge current 0.8mA
Supply voltage (min)17V dc
Supply voltage (max)28V dc
Supply voltage (Vmin-Vmax)17 to 28V dc
Quiescent current, 20kO EOL fitted0.2mA
Environmental
Humidity (min)0% RH
Humidity (max)95% RH
Humidity Noteno condensation or icing
Humidity0% to 95% (no condensation or icing)
Operating temperature (min)-20°C
Operating temperature (max)60°C
Operating temperature-20 to 60°C
Conformance
ApprovalsVNIIPO
Mechanical
Weight30g
ColourWhite
Product length20mm
Product width39mm
Product depth39mm
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.