Back

Discovery Manual Call Point

Product code: 58100-910SIL

58100-910SIL - Discovery Manual Call Point
The Discovery Manual Call Points (MCP) have been designed for use in areas where SIL approved devices are required.
Full Details
Product Information

The Discovery Manual Call Points (MCP) have been designed for use in areas where SIL approved devices are required.

Operation

The address of each Discovery Manual Call Point (MCP) is set at the commissioning stage by means of a seven-segment DIL switch. If a MCP is activated, it interrupts the normal protocol to give a fast response. A single bi-coloured alarm LED is provided on the call point. This LED is controlled, independently of the call point, by the control panel and may be set to flash each time the call point is polled. The red LED is lit when the call point has been activated and sent into alarm. On the isolated versions an amber/yellow LED indicates a short-circuit on the loop wiring either side of the call point. Call points can be remotely tested from the panel by transmission of a single bit in the communications protocol. Call points respond by providing a value of 64 which corresponds to the alarm value. The panel should recognise this response as a test signal and should not raise a general alarm. Discovery MCPs are available with or without an isolator. Each version is available with a resettable element and a backbox for surface mounting as standard. If a glass option is required, spare glasses are available on request. For ease of installation Discovery MCPs are supplied with clip-on terminal blocks and a connector which allows continuity testing before call points are commissioned. To provide additional protection against accidental operation, a transparent hinged cover with a locking tag is available, which can be fitted to the MCP. Please note that the call point does not conform to EN54-11 when this lid is fitted and secured with the locking tag.

EMC Directive 2014/30/EU

The Discovery MCP complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described in this datasheet. A copy of the Declaration of Conformity is available from the Apollo website: www.apollo-fire.co.uk Conformity of the Discovery MCP with the EMC Directive, does not confer compliance with the directive on any apparatus or systems connected to them.

Construction products regulation 305/2011

The Discovery MCP complies with the essential requirements of the Construction Products Regulation 305/2011/EU. A copy of the Declaration of Performance is available from the Apollo website: www.apollo-fire.co.uk

Key Features

SIL approved Resettable operating element Easy access, front reset mechanism Ergonomic reset key and keyring hole Front facing accessible addressing for commissioning E-Z fit first fix terminals for installation (indoor only) Flashing polling LED option EN 54 -11 and EN 54-17 Certified 170º viewable LED indicator

General
Warranty10 year
Electrical
Status indicator - AlarmRed
Quiescent current100μA
Quiescent current tested at24V dc
Supply voltage (min)17V dc
Supply voltage (max)28V dc
Supply voltage (Vmin-Vmax)17 to 28V dc
PolarityL1 & L2 are polarity sensitive
Environmental
Humidity (min)0% RH
Humidity (max)95% RH
Humidity Noteno condensation or icing
Humidity0% to 95% (no condensation or icing)
Operating temperature (min)-20°C
Operating temperature (max)60°C
Operating temperature-20 to 60°C
Mechanical
ColourRed
Materials housingPolycarbonate
Product length93mm
Product width89mm
Product depth26.5mm
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.