Back

Weatherproof Manual Call Point (Red)

Product code: 58100-950APO

58100-950APO - Weatherproof Manual Call Point (Red)
The Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated, the Manual Call Point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.
Full Details
Electrical Description

The Discovery Waterproof Manual Call Point is loop powered and operates at 17–28V DC.

Operation

The address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. A single bi-coloured alarm LED is provided on the call point. This LED is controlled independently of the call point, by the control panel. The LED is illuminated red when the call point has been activated. The LED is illuminated amber/yellow LED to indicate a short circuit. This Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which fits neatly in the back of the call point. Once activated, the Discovery Waterproof Manual Call Point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home. The isolated version of the Discovery Waterproof Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Full details of the isolator can be found in the PIN Sheet PP2090, available on request.

Mechanical Construction

The component parts of the call points are moulded in polycarbonate or ABS, depending on their function.

Backward Compatibility

The Discovery Waterproof Manual Call Point will operate only with control equipment using the Apollo Discovery digital protocol.

EMC Directive 2014/30/EU

The product complies with the essential requirements of the EMC Directive 2014/30/EU, provided that it is used as described.

Construction products regulation 305/2011

The product complies with the essential requirements of the Construction Products Regulation 305/2011.

Product Information

The Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated, the Manual Call Point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.

Key Features

IP 67 rated 'Plug and play' terminal connections for fast wiring Continuity link for wiring test before commissioning Reports an alarm in under 0.2 seconds Resettable element

General
Warranty10 year
Electrical
Power-up surge current 1mA
Maximum power-up timeCommercial
Quiescent current100μA
Environmental
Humidity (min)95% RH
Humidity (max)0% RH
Operating temperature (min)-30°C
Operating temperature (max)70°C
Operating temperature-30 to 70°C
IP ratingDesigned to
Conformance
Approvals
  • CPD
  • LPCB
Mechanical
Weight240g
ColourRed
Materials housingPolycarbonate
Product length98mm
Product width93mm
Product depth71mm
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.