Back

Apollo Waterproof Manual Call Point (Red)

Product code: 58200-950APO

58200-950APO - Apollo Waterproof Manual Call Point (Red)
The Apollo Waterproof Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. The manual call point interrupts the polling cycle for a fast response, when activated. A combined LED indicator and front reset mechanism allows for a simple reset.
Full Details
Electrical Description

The Waterproof Addressable Manual Call Point is loop powered and operates at 17-28V dc for all variants.

Operation

The address of each Manual Call Point is set at the commissioning stage by means of a seven-segment DIL switch. A red alarm LED is provided on the Manual Call Point. This LED is controlled independently of the Manual Call Point, by the fire control panel. Once activated, the Manual Call Point can be reset by inserting the reset key into the front facing LED, turning clockwise until a positive click and reset occurs. The isolated version of the Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Isolator operation is indicated by a yellow LED. For further details of the isolator refer to datasheet PP2090, available on request.

Mechanical Construction

The component parts of the Manual Call Point are moulded in a robust fire retardant polycarbonate. Datasheet PP2454 / Figure 1 shows the mounting hole dimensions and the available cable entry glands and datasheet PP2454 / Figure 2 shows the overall dimensions.

Communication

Protocol - Device behaviour: (Fire control panel dependant) XP95 - XP95 Discovery - Discovery CoreProtocol - Discovery

Additional Information

IP rated installations Apollo recommends installing the Waterproof Manual Call Point using cable entry from the bottom of the MCP. It is important that correctly IP rated cable glands are used to ensure the IP rating of the device is not compromised. All cable glands and unused cable entry blanking plugs must be fully tightened and sealed to ensure the IP integrity is maintained. Use of PTFE or similar thread sealer is recommended.

Product Information

The Apollo Waterproof Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. The manual call point interrupts the polling cycle for a fast response, when activated. A combined LED indicator and front reset mechanism allows for a simple reset.

Key Features

EN 54-11 approved (EN 54-17 approved for Isolator version) A unique, ergonomically designed key for resetting and front cover removal Captive screws

General
Warranty10 year
Electrical
Protocol voltage (min)5V
Protocol voltage (max)9V
Protocol voltage5 to 9V peak to peak
Power-up surge current 1mA
Maximum power-up time1 second
Quiescent current100μA
Quiescent current tested at24V dc
PolarityL1 & L2 are polarity sensitive
Alarm current (at 24 volts)4mA
Environmental
Humidity (min)0% RH
Humidity (max)95% RH
Humidity Noteno condensation or icing
Humidity0% to 95% (no condensation or icing)
Operating temperature (min)30°C
Operating temperature (max)70°C
Operating temperature30 to 70°C
IP rating ValueIP67
Conformance
StandardsEN 54-11
Approvals
  • SBSC
  • CPR
  • FG
  • VNIIPO
Mechanical
Weight325g
ColourRed
Materials housingPolycarbonate
Product length114mm
Product width114mm
Product depth74mm
Detection principleOperation of a switch.
Key typeApollo Manal Call Point reset key
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.