Back

Series 65 12V Relay Base

Product code: 45681-508APO

45681-508APO - Series 65 12V Relay Base
The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a ‘latching’ position. For security systems the jumper is moved to another position so that the base is ‘non-latching’.
Full Details
Brand Information

Series 65 incorporates well-proven sensing technologies, including an Integrated Circuit based on that used in XP95 analogue addressable detectors. The Series 65 range has a wide operating voltage of 9–33V and consists of ionisation, integrating ionisation and optical smoke detectors, four grades of heat detector and a range of bases.

Brand Features

Wide-operating voltage of 9–33 V DC Wide-operating and storage temperature of -20°C to +60°C Can be used on security systems Electrically and mechanically compatible with Series 60 Proven detection performance

Electrical Description

The 12V Relay Base is operated by the detector and must therefore be fitted with a Series 65 smoke or heat detector to function. The base is designed to operate over a voltage range of 9V to 15V dc. The negative line is connected to the L1 IN and L1 OUT on the moulding terminals. The positive line is connected to IN+ and OUT+ on the terminal block. Note: Do not connect any external wire to the –R terminal as this may prevent the relay base from functioning correctly.

Operation

Series 65 Relay Bases are primarily intended for use with control units using 4-wire detector supply and alarm initiating circuits. Where local codes allow, they may also be used in 2 and 4-wire circuits to provide volt-free control signals to an auxiliary system such as an automatic door closer. They are not suitable for use in systems where it is specified or required that operation of the auxiliary system shall be fail-safe and must not be used with any other type of detector.

Mechanical Construction

The base is a white self-extinguishing polycarbonate moulding with zero-force nickel-plated steel terminals for attaching the detector. The moulding has an aperture to accept the locking grub screw built into the detector case. All electronic components, including the relay, are mounted on a PCB which is retained by two screws in the moulding.

Product Information

The Series 65 12V Relay Base is designed for use in both fire and security systems. For fire systems a jumper on the PCB is fitted to a ‘latching’ position. For security systems the jumper is moved to another position so that the base is ‘non-latching’.

Key Features

Detector locking mechanism One-way fit Easy to wire Contains an earth connector Can be used in fire and security systems

General
Warranty10 year
Conformance
StandardsEN 54-18
Approvals
  • CPD
  • LPCB
How to Order

Apollo is dedicated to ensuring that our customer service is aligned with your expectations. This includes making our order, service and delivery process a seamless and hassle-free experience.

Full details of our service standards can be downloaded here.

Existing customers

Please email your order to us at: ukorders@apollo-fire.com or tel: 023 9245 6530.

New customers

Please email your order to us at: sales@apollo-fire.com or tel: 023 9244 2700.

Oops…

Despite our best efforts, mistakes sometimes happen. Please contact us at: orderqueries@apollo-fire.com if you have any difficulties placing your order.

Please note…

Remember to quote your account number and purchase order number on any order correspondence.

All orders must be over £50.00 (excluding carriage). Any orders received under the minimum order value will be returned to sender for revision.